Aquaseal Urethane Adhesive & Sealant
Your watersports gear isn’t disposable…
Aquaseal can fix nearly everything. With it you can make permanent
repairs to tears, holes and rips in wet suits, dry suits and most other
watersports gear. Its super-strong formula seals and waterproofs
equipment, and protects gear against abrasions. Aquaseal is part of a
comprehensive line of Care and Repair products from Gear Aid. With Gear
Aid, anyone can be a master of gear repair.
Works well with neoprene, nylon, GORE-TEX® fabric, Nypalon®, urethane, rubber and other materials. Aquaseal’s flexible urethane formula waterproofs, seals and protects against
abrasion. Hundreds of watersports and household uses.
General Repair Instructions
Clean damaged area with Cotol-240™ Cure Accelerator/Precleaner or a solvent such as paint thinner, nail polish remover, or rubbing alcohol.
Trim loose threads. Non-fabric surfaces should be roughened with
sandpaper, then cleaned. Apply Aquaseal® to surfaces directly from tube
or with knife or flat stick. Keep repair level overnight. Avoid contact
with other surfaces.
Most repairs reach full strength overnight (10-14 hours). Allow
longer for thickest repairs. For fastest cure (2 hours or less), mix in
HOLES AND TEARS: Create a backing with removable tape. Fill void and 1/4″ beyond edge with Aquaseal. Remove tape after full cure.
SEAMS: Apply 1/16″ thick bead overlapping seams edges by at least 1/4″. Apply with slight pressure to saturate fabric surfaces.
HIGH WEAR AREAS: Apply thin coat with knife for flexible abrasion resistance.
WARNING: FULLY CURED AQUASEAL IS SLIPPERY WHEN WET. For added
traction on footwear, sprinkle sand on uncured Aquaseal 1/2 hour after
CLEAN UP: To remove Aquaseal from hands, buff with cloth soaked in paint thinner, nail polish remover or 99% isopropyl alcohol.
STORAGE: Advance contents to tube neck. Wipe clean and cap. Keep
in cool, dry place; for extended life, place in freezer. To thaw or for
easier-flowing contents, soak tube in warm water for 15 minutes.
Protective Knee Patch Instructions
Create an ultra-tough, flexible knee patch with Aquaseal to protect
suits from abrasion. Simply apply a thin coat of Aquaseal with a
disposable plastic knife. Dry level overnight.
Drysuit Cuff Repair Instructions
Turn suit inside out. Clean damaged area with Cotol-240 or isopropyl alcohol. Non-fabric surfaces such as latex should first be roughened with sandpaper, then cleaned.
Apply Aquaseal in a 1/16th high bead overlapping seam edges by at least 1/4in. Use included brush to saturate fabric surfaces. Dry level overnight.